Projector Ceiling Lift BA 60 x 60 – for Suspended Grid Ceilings, 20 kg

 The technical details at a glance (Download operating and installation manual) as well as the data sheet (Download data sheet)

Quality that impresses

We use exclusively German brand bearings from Igus. They are specially oversized and therefore run completely noiselessly. 40NM Jaro Lift motors can move up to 80 kg and far exceed the maximum requirement for the lift. The drive motor can be precisely limited at the upper entry and exit points. Control via a projector trigger output via relay is also possible.

The safe 230 Volt / 120 Watt tubular motor runs smoothly and quietly in operation, which is not only due to the stable and widely built belt system.
The motor can be switched via any roller shutter motor, such as Alexa, Apple Home, Loxone, KNX, Homematic and others.
Despite its quiet operation, the motor has a fast lifting speed (15 rpm). With a mounting height of only 12.5 cm, it can extend up to 60 cm.

Ultra slim with recessed motor unit

As individual as your room, so is your lift. When retracted, the projector becomes invisible. Your living room or office looks tidy and the projector is protected from access. At the push of a button, the lift extends and the projector can be put into operation. The projector can be mounted either inside or under the lift. We recommend rubber feet for this to place the projector upside down. No additional suspended ceilings are required with our system. Thanks to the recessed motor unit, we gain maximum installation space in the lift. The installation and mounting surfaces are made of 6 mm thick aluminum. They can not only bear heavy loads but also do not warp under heavy load. On request, you can connect an EIB bus, Loxone, roller shutter switch or much more! Optionally, drywall panels can be attached to the underside of the ceiling lift. Thanks to the stable and lightweight scissor joints, the lift retracts completely into the ceiling.

20mm solid material Igus bearing

It is especially important that projectors are moved gently. They should not jerk or even bounce. This is exactly prevented by our X-Lift. Thought-out bearing technology prevents all kinds of movements. The lift moves very gently and quietly to the desired position. Advantages at a glance lubricant-free corrosion resistance maintenance-free good media resistance high compressive strength low friction values high mechanical damping high dirt sensitivity low weight high wear resistance

1 x Hoist
1 x Igus Energy Chain
1 x User Manual
1 x Packaging extra-strong foam-padded for secure transport