A newly laid granite driveway, an open property – and around 20 journeys every day in which vehicles turn, reverse and manoeuvre there. Mostly vehicles that never meant to come here at all. What the paving had to endure was one thing. On top of that came oil stains on the light-coloured stone, a gate damaged by a vehicle and a moment when the family's dog almost ended up under the wheels.

“The vehicles dripped oil all over the expensive granite, wrecked our gate – and once almost ran over our dog. That's over now.”

The owners decided on a retractable bollard from Braun Antriebe. Since then, only those who belong there drive into the driveway.

How robust is a bollard like this really?

The answer came sooner than expected. The driver of a delivery van looked at his smartphone instead of the road for a moment – and drove the van head-on into the raised bollard.

Stainless steel bollard stops the delivery van at the property access

The van is stopped – and the bollard is still standing. The bumper has been torn apart; the stainless steel underneath is unharmed.

Front-end damage to the van, nothing on the bollard

The result can be seen in the photos: a torn-off bumper, a pushed-in front, a van that should not be driven any further like that. The bollard, on the other hand, has no dent and no deformation – the solid stainless steel cylinder absorbed the impact completely.

And most importantly: it carried on working perfectly normally afterwards. One press of a button, and the bollard lowered and rose again cleanly as if nothing had happened. No repair, no replacement, no downtime.

Damaged front of the delivery van after hitting the bollard

The front of the delivery van after the impact. The bollard has since resumed its normal service.

Why the bollard can take it

Our bollards are made of V4A stainless steel (1.4571) – the same alloy used in swimming pools and the chemical industry. The cylinder sits in a concrete foundation that transfers the impact force into the ground. The drive is pneumatic: the bollard contains only a stainless steel cylinder, and the compressor and valves stand dry in the house. So there is no motor and no electronics in the ground that could be damaged in an impact or exposed to moisture. This makes the system very low-maintenance – and in an emergency, a visual check is enough, no workshop appointment needed.

Anyone who needs even more impact protection, for example at a commercial access or against deliberate drive-throughs, can get the same design from us as a security bollard with 12 mm or 30 mm wall thickness.

Is your driveway also being used as a turning area?

The pattern is almost always the same: a wide, open access, a narrow street in front of it – and everyone who does not know where to go turns there. We have described similar cases here: Granite-paved courtyard entrance with six bollards, Driveway secured with three bollards and An end to the supplier turning area on a hillside.

Send us a photo of your driveway via WhatsApp to +49 172 4544485 or call us on +49 40 226390411. We will tell you how many bollards you need, where they should stand and which control system fits. You will find all models and prices in our overview retractable bollards made of stainless steel V4A; read more on the pages Driveway bollards and Bollards on private property.

WhatsApp Button